高输出功率小功率校正仪（耐焊弧校正仪）-（确定机有效控制）

High voltage low current tester (arc resistance tester) - (computer control)

商商品品牌称：耐电弧试验机

Product name: electric arc resistance tester

服务规格型号：NDH-A

Product model: NDH - A

够满足条件：GB/T 1411-2002《胶体电绝缘素材耐高低平功率弧光电池充电的测试》（一样IEC  61621-1997）及ASTM D495等的标准的标准要求装修设计产生的，并满足IEC 149、UL 746A等检测技术

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

注意适用于范围之内及性能：

本冲击试验装置是确定APP于交流接触器、设备和家庭用设备等制造行业的水电工用塑胶板材、树酯胶和接地漆等接地相关资料的耐脉冲能考核评价，主用来胶体接地相关资料如：塑胶板材、pet薄膜、树酯、白云母、陶瓷厂家、窗户玻璃、接地油、接地漆、厚纸板等有机溶剂的耐脉冲能检验；

本疲劳试验装置由算出机掌控自动运行，不错屏幕上显示某一研究设计模式及研究设计日期，研究设计结束之后并保留某一研究设计资料，并可打印出.条件实验室评估。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 远程服务器为升降集成组成部分，下方为操作步骤整体，上面为疲劳环境试验箱。

2 本物料根据*新智能化把握技能，根据考虑程度（IEC或ASTM）可自行采取试验检测，并在电脑主机上显现现场实验流程和最后。

3 **耐磨性充分，抗电磁干扰力强，检查精密度较高。

二：Functional features：

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 脉冲通断日子出现偏差的原因：超过 ±10ms

2 调压器电容量：2kVA

3 額定试验装置线电压：12.5kV

4 校正电流精密度较：±3%

5 瞬时电流保持精密度较：±10%  直流电压预估准确度：1.5%

6 金属电极对岩样阻力：（0.5±0.05）N

7 探针素材：钨棒

8 电极片时间：（6.35±0.1）mm（IEC）

               （6.0±0.1）mm（ASTM）

9 应用大环境溫度：（23±2）℃

10 用自然环境干湿度：（50±5）%

11 电压：220V±5%  50Hz  10A

12 实验室检测    措施：   国际标准/美标/10 mA 反复/20 mA 间断性/30 mA连续式/40 mA反复

13 经过多次实验发现源程序下述：

Three main technical parameters：

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

Four configuration：

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 物料型号查询：

NDH-A    耐电孤检测仪-微机操纵

NDH-B    耐电弧焊接实验仪-触屏屏操作

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询！